Qiangsheng electric rickshaw frame is designed according to the design principle of automobile light truck.
It is square steel structure to make the frame more stable. It is more durable,
and the front of the frame design will be about 1-3cm lower than the back.
After the battery is installed, its driving force and gliding force will be greater to achieve the purpose of more power saving.
Qiangsheng patented cross brace square tube fully welded outsole is equipped with an integrated forming outsole.
The bucket bottom of our Bajaj RE bajaj auto e-rickshaws adopts the square tube fully welded cross brace process, which is unique in China.
This process greatly increases the load and service life of the bucket.
The reasonable structural design thickens the frame, which greatly increases the load of Bajaj RE bajaj auto e-rickshaws.
As well as the safety Qiangsheng high load model, equipped with patented double-layer leaf spring damping, strong visible!
The semi axle rear axle system developed and produced by Qiangsheng has absorbed the reliability and durability of the traditional process.
The most important thing is that the research and development has extended the bearing inlaid end of the rear axle terminal, so that the bearing rear axle is laborious and does not damage the semi axle, so as to ensure that the axle is not cut and continuously used for a long time.
And the half shaft adopts the cold drawing process, which not only ensures the rigidity of the half shaft, but also ensures the toughness, without gear hobbing and shaft cutting., The most important thing is that the self production of the rear axle half shaft ensures the provision of long-term after-sales service!
All the foot pedals of Qiangsheng 3 wheels motorcycle taxi are made of frosted anti-skid technology, which is beautiful, generous and environmentally friendly, and solves all the problems caused by the traditional ordinary foot pads.
The rear axle fixing screw of Qiangsheng motorized Bajaj TUK passenger tricycle KEKE Tvs tricycle adopts the fixed lock sheet developed exclusively. The rear axle locks on the market are fixed with snap rings or lock pins. When the screw is loose after a long ride, the rear wheel will swing, even the lock pin will rust and the tire will fall off, and the safety hazard is very large. We are superior to the rear axle fixed locking plate, which perfectly solves the above hidden dangers.
Qiangsheng “core” power features:
The core components are carefully selected and matched by Qiangsheng special platform, and its output power is 30% more than that of ordinary vehicles
Controller: imported mousse tube, the 3rd generation enlarged casing has good heat dissipation, and is produced by a fully automatic welding production line
The controller 40v/60v is more energy-saving and intelligent.
The precise fixed tie rod process adopted by Qiangsheng has independently designed and accurately produced the frame and tie rod design, which solves the problem that the frame rear axle of traditional enterprises can only be adjusted by the original tie rod screws. Qiangsheng motorized Bajaj TUK passenger tricycle KEKE Tvs tricycle reduces the problem of later use by consumers and reduces the after-sales trouble of sales agents
Each batch of shock absorber has passed 30000 high-strength destructive tests (strong rather than fine selection). Characteristics: 1. The electroplating rod has not rusted for 3 years: it has been plated twice with nickel and once with chromium after 7-level electroplating, and only once with chromium for ordinary 2-level electroplating
2. The thickened aluminum barrel will never break: Qiangsheng aluminum barrel adopts the pouring process, which does not contain pores and will not break (ordinary aluminum barrel is die-casting with pores, which is easy to leak and break)
3. There are 17 processing procedures for high-quality oil pressure piston rod, with good air tightness and high-strength oil resistant sealing ring.
4. Leak proof cushion 8.8 high strength screw
Qiangsheng high load vehicle is equipped with patented double-layer leaf spring damping, which is strong and visible!
Qiangsheng adopts a fully enclosed electrophoresis line, so that the parts with weak traditional coating methods such as inner cavity, weld and edge of the work piece can also get good coating protection, so that the overall corrosion resistance of the product is significantly improved, and finally the service life of the electric rickshaw is greatly prolonged and the grade of the product is improved.
During robot welding, the welding parameters of each weld are constant, and the weld quality is less affected by human factors, so the welding quality is stable, so as to ensure the unity of the quality of our products.
Post time: Nov-13-2021